Precision positioning control

 Any combined control servo and stepping motor

 Contouring control, speed control

 Tracking control

 X-Y table, rotary machine, robotics control

 Mixed servo closed loop and stepper open loop control

 Biotech sampling and handling

Features

 Same basic function as MPC3024A

 4-axis servo fully closed loop PI control

 4 stepper semi-closed loop control

 Mixed semi-closed / fully closed loop control

 Tracking control on X, Y and Z, A axis

 Encoder feedback broken detection

 4 17-bit DA

Specifications (With Matched Wiring Board)

Main Card -- Motion

 Max pulse rate : 6,553,500 pps (with magnetic-coupler isolation)

 Pulse output mode : Single phase : CLOCK, DIR 

 Encoder up / down counter : 4 28-bit counter

                                      Dual phase : CW, CCW

 Pulse Handle up / down counter : 4 28-bit counter

 Acceleration / Deceleration mode-linear, S-curve

 Linear interpolation : any 2 up to 4 axis

 Homing mode : 14 types

 Circular interpolation : any 2 axes

Main Card -- Pulse referenced PI closed loop control

 Resolution : 17-bit

 D/A range : +10Vdc ~ -10Vdc

 Error counter : 32-bit

 Digital sample time : 0.25ms

 Proportional gain : 1~4095

 Integral time : 1ms ~ 4095ms

 Feedback multiple rate : x1, x2, x4

Main Card -- Digital I/O

 Motion specific input : SRDY, ALM, LS+, LS-, SD, ORG, PCS, LTC, INP per axis, EMG per card

 Motion specific output : CMP, SVON, ERC, FIN per axis

 General digital I/O : 8 TTL (nibble configurable)

Main Card -- General

 Card ID : 16 locations set by rotary switch

 External supply : 24Vdc ± 4Vdc

 Insulation resistance : 100M Ohm(min) at 1000Vdc

 Operation temperature : 0 to +70 degree C

 Isolation voltage : 2500Vac 1Min

 Storage temperature : -20 to +80 degree C

 I/O connector : 2 68-pin female mini scsi connector

 Operation humidity : 5~95% RH, non-condensing

                             D type 25P connector

 Dimensions : 175(W)*122(H) mm, 6.9(W)*4.8(H) in

DIN rail mounted wiring board

ADP3024ACDIN DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 On board build-in s.p.s. : +5Vdc 500mA(Max)

 General input : 4 with LED indicator

 General output : ADP3024ACDIN(N) : 8 NMOS(Sink 1A @120Vdc) with LED indicator

                                ADP3024ACDIN(P) : 8 PMOS(Source 1A @ 24Vdc) with LED indicator

                                ADP3024ACDIN(R) : 8 Relay(3A @250Vac or 3A @30Vdc) with LED indicator

 Connector : 2 68-pin mini scsi female connector for main card connection

 Specific servo control connector : 4 D type 26P(1 per axis)

 Operation temperature : 0 to +70 degree C

 Operation humidity : 5~95% RH, non-condensing

 Dimension : ADP3024ACDIN(N) : 121(W)*204(L)*47(H) mm, 4.8(W)*8.1(L)*1.9(H) in

                         ADP3024ACDIN(P)/(R) : 121(W)*204(L)*45(H) mm, 4.8(W)*8.1(L)*1.8(H) in

JS51050 25PM DIN rail mounted wiring board for JM3 pulse handler interface

 Connection cable : D type 25P cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

 Driver, DLL, Demo and Example Program

Manual

Catalog

WinXP/7(32bit)

Win7(64bit)

Win10(32bit)

Win10(64bit)

 Labview

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

 Driver

PRODUCT

DESCRIPTIONS

 1.

MPC3024AC

4-axis Motion Control Card for Servo / Stepping Motor Control (include SM23404)

 2.

ADP3024ACDIN(N)

DIN rail mounted wiring board matched MPC3024AC, General output : 8 power NMOS

 3.

ADP3024ACDIN(P)

DIN rail mounted wiring board matched MPC3024AC, General output : 8 power PMOS

 4.

ADP3024ACDIN(R)

DIN rail mounted wiring board matched MPC3024AC, General output : 8 Relay

 5.

M266868151

68-pin mini-SCSI cable 1.5 M for JF1/JF2 Note : Two axes control signal granted in one cable

 6.

M2668683011

68-pin mini-SCSI cable 3.0 M for JF1/JF2 Note : Two axes control signal granted in one cable

 7.

FVC01

Frequency to voltage module

 8.

JS51050

DIN rail mounted dummy wiring board(D type 25P male to terminals) for JM3 pulse handler interface

 9.

M270325X4

D type 25P male-female cable 1.5M for SM23404

 10.

M270325X4S

D type 25P male-female cable 1.5M, shielding for SM23404

 11.

M270325X0

D type 25P male-female cable 3.0M for SM23404

 12.

M270325X0S

D type 25P male-female cable 3.0M, shielding for SM23404

 13.

SM23404*

Extension kit for JM3(bracket and flat cable for 25P female D type connector)